How to replace Rolex bezel? (TIPS & TECNIQUES)

Owning a luxury watch is delightful and even excited, but it comes with a lot of care and trouble at the same time.

When you are on an adventure or doing intense sport, you may get too carried away and damage your wristwatch.

If you own a fancy watch model like Rolex, you know this is a big deal.

But dealing method with this problem is a critical factor in replacing or repairing the watch.

If you have ever owned a Rolex, you know that one of the components of these models that get damaged very often is the bezel of the wristwatch.

There are several ways that you can fix this issue that we are going to offer to you, so you won’t have to stay worried about this incident.

In this article, we are going to learn about the ways that how to replace Rolex bezel by yourself? So, without any more introduction, let’s start the essay.

Review Bezel on Rolex Datejust

How to deal with damage in Rolex bezels?

When owning an expensive watch, you have to always pay attention to keeping your watch safe from any harm, but inevitably accidents happen, and sometimes there is nothing that5 you can do about it.

But there is no need to panic. In this article, we will tell you all about the bezel replacement of Rolex watches; whether you are a professional wristwatch repairer or you happen to own a Rolex and want to repair it yourself, we are pretty sure that you will enjoy this article.

Now let’s get started.

To continue let’s go to see some of the things that can happen to your Rolex bezel:

In what circumstances do you need to replace your Rolex watch? (+ 4 REASONS)

  • The bezel could bend from getting hit.
  • The pressure can also bend the bezel.
  • There is a problem with the caliber, and you have to disassemble your watch.
  • The bezel has scratch marks, and you want to replace it.

Now, if you have encountered one of these problems, chances are you want to replace the bezel on your Rolex.

There are some compassionate and critical steps in opening up a wristwatch-like Rolex and replacing a component.

Suppose you don’t have any experience in repairing watches. In that case, we suggest that you take your timepiece to a professional repair shop, Rolex shops because a delicate job needs skill and years of experience.

Now let’s say that you have repaired some wristwatches and want to replace or repair a Rolex bezel yourself.

We will walk you through the extreme steps of repairing your wristwatch, so get ready, prepare your tools and let’s open up your Rolex watch.

Warning: Before getting started once again, we warn you that repairing a watch by yourself is risky, so considering this fact, let’s begin.

There is some essential equipment that you will need during this process:

Equipment needed to replace Rolex bezel (+ 5 ITEM)

  1. Tape.
  2. A blade knife (keep in mind that it doesn’t have to be sharp. You can use a butter knife, for instance).
  3. Watch.
  4. Attention and patience.
  5. Extreme need to repair your watch.

There is the fact that you have to know before moving on, opening up any water-resistant or waterproof watch means that after you close it up or assemble it again, it won’t be water-resistant anymore.

In making high-end water-resistant watches like Rolex Sub Mariner, a special glue gives the watch water protection. Still, you rip open the bond when you open your timepiece.

Since the glue that these companies use is exclusive and nowhere to be found, your watch will lose its water-resistant abilities.

Now back to the instructions; let’s get to the next chapter and start the tutorial.

Bezel on Rolex Datejust

How to replace the bezel on a Rolex watch? (+ 7 steps tutorial)

So before starting, make sure to remove the bracelet of the watch so you will be protecting it from scratches.

Now let’s start the process:

Step 1

Use rubbing alcohol or any disinfectant to clean the surface of your watch frame and bezel.

This act will make sure that the tape will do its job correctly.


Step 2

Take a small piece of tape and stick it right on the spot where you will insert the knife and lift the bezel.

Ensure that the tape you are using is thick enough to prevent scratches from the knife; an example of a perfect video is electrical tape.

Step 3

Take your knife and carefully insert it into the spot between the bezel and the frame.

This step requires lots of attention and delicate work, so take your time and don’t hurry. Make sure that you are inserting the knife in the right spot.

Step 4

After ensuring that the knife cannot go any further, slowly put persistently apply pressure, lift the bezel, and separate it from the watch’s frame.

Take this step slowly because if you apply too much pressure, there is the possibility that you will damage your watch.

Up until this point, you removed your Rolex bezel successfully; the next step is to replace the new bezel.

But before installing the new bezel, there is something that you have to know.

We are sure that when you took off the bezel, you noticed a spring under the bezel; you have to be very careful not to damage it; that spring is connected to the caliber and is the key to holding your new bezel.

Now let’s get to install a new Rolex bezel.

Replacing the Rolex bezel (+ 3 steps)

The next part of this tutorial is installing the new bezel on your Rolex watch.

Step 1

Remove the insert part of the bezel, which usually contains numerals or colors.

Step 2

Please pick up the new frame you have purchased and place the insert part inside it.

Step 3

Place the whole bezel onto the watch and make sure that you align the numerals precisely right because they are your guidelines.

After placing the bezel, apply pressure until it clicks.


And you have completed the repairing process, congratulations.

If you made it this far into the article, we are sure that you succeeded in repairing your Rolex bezel.

After finishing the operation, try not to use the watch for at least 24 hours.

Now that you know the entire method to replace the Rolex bezel, it’s time to conclude this article, so let’s get to the bottom line.

Summing all up

Expensive and luxury watches are hard to maintain. Therefore caution in using these models is the first factor in owning them.

But if anything happens to your precious watch, do not worry. We got your back.

By using the instructions in this article, you can efficiently but sensitively fix your wristwatch yourself in the comfort of your own house or shop.

We are glad that you stayed with us until the end of this article, and we hope that using our instructions, you can successfully replace the bezel on your Rolex watch.

If you have any additional inquiries or opinions about the “How to replace Rolex bezel?” you can share your thoughts in the comment section beneath this article.


Is replacing the Rolex bezel dangerous?

  • If you don’t have the skill or experience to repair a high-end watch, it certainly is dangerous to do the repair work by yourself.

Are there any other ways to replace a Rolex bezel?

  • You can take your Rolex into any Rolex shop and request a service. Usually, these companies have up to 5 years of warranty.

Is there any special equipment to replace the Rolex bezel?

  • It Depends. Of course, there is some special equipment to replace or even repair the bezel, but you can do it DIY by following the tutorial in this article.
5/5 (4 Reviews)

Hadis Vaziri

i’m Hadis and i’m one of the content writers/editors at SaatsazWatch. I’m here to deliver a helpful content about what you’re looking for and my goal is to update and develop new ideas. Contact me via hadis [@]

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button